AUTOMATION FOR HOME
Own forces carried out the production of components home automation, ETHERNET-DEVICE module is connected at any point in the local network, collect data connected to it's sensors (motion, intrusion, temperature, water, pressure). Produced as a wired (connection to the "twisted" pair) and wireless (built-in WiFi module) model.
Supply module home automation third-party proizvoditelnosti X10X10 is an international open industry standard used for communication of electronic devices in home automation systems. The X10 standard defines methods and Protocol for transmission of control signals to electronic modules which are connected to appliances, using conventional wiring or wireless channels.The X10 standard was developed in 1975 by Pico Electronics (Glenrothes, Scotland) to control home appliances.Nowadays, the standard remains one of the most popular, although there are a number of alternatives with more features: KNX, INSTEON, BACnet and LonWorks. To link network modules X10 is to use the normal home mains. The encoded digital data is transmitted using a radio frequency pulse flash frequency of 120 kHz, with a duration of 1 MS, synchronized with the moment of transition of the alternating current through zero. One zero crossing is transmitted one bit of information. The receiver also generates a wait window near the voltage passes through 0. The window size is 200 µs. The presence of the pulse flash in a window is a logical 1, the absence a logical "0".The modules typically are simply inserted into the socket, although there are more complex plugins, such as model outlets, switches, etc. Relatively high carrier frequency allows the signal to propagate through transformers or between phases in multi-phase networks and networks with split phase. For networks with split phase signal with a phase-to-phase could be a simple capacitor, but for multiphase networks, and those networks split phase, where the common condenser is small, it is necessary to use an active repeater. But with the signal from phase-to-phase it is necessary to consider the above condition bit transfer starts when zero crossing. For this reason, the transition from phase to phase, the signal is shifted by 1/6 cycle.Another important point is the ability to block signals outside the network to, for example, modules on the same network X10 does not affect the X10 network in a neighboring house. In such cases, to block signals use inductive filter.Controllers RazumdomПредставляем on the Ukrainian market the products of the Russian manufacturer of Intelligent Home.OOO "Intelligent House" is a leading Russian developer and manufacturer of home automation Smart House. The company offers an affordable and simple solution that enables the installation of systems in large houses and cottages and conventional homes. Used technologies: X10
CONTROLLERS Z-WAVEZ-Wave is a proprietary wireless communications Protocol designed for home automation, in particular for the control and management of residential and commercial buildings. The technology uses low-power and miniature radio frequency modules that plug into consumer electronics devices and are used in various systems such as lighting, heating, access control, entertainment and gaming devices and household appliances.Z-Wave is a wireless radio technology designed specifically for remote control. Unlike wifi and other IEEE 802.11 data transmission standards, are designed primarily for large flows of information, Z-Wave operates in the frequency range up to 1 GHz and are optimized for sending simple control commands (e.g., enable/disable, change volume, brightness, etc.). Select the low radio frequency band for Z-Wave is caused by the small number of potential sources of interference (as opposed downloaded the 2.4 GHz band, which is necessary to resort to measures that reduce possible interference from the various household wireless devices — Wi-Fi, ZigBee, Bluetooth).Other benefits of Z-Wave it is possible to note low energy consumption, low production cost and embedding of Z-Wave in various home appliances.There are more than 200 manufacturers, offering products from Z-Wave chips or modules. A distinctive feature of Z-Wave is that all of these products are compatible with each other.
CONTROLLERS ETHERNET DEVICE
The proposed private development — "prokinetic" the system "Smart House".Ethernet device is a specialized controller designed to collect information from sensors, card readers and electronic keys and control actuators and mechanisms for Ethernet (Internet), 2012-version available with built-in Wi - Fi module.A small network with multiple Ethernet controllers and their attached sensors and actuators to fully automate an apartment or a house.We offer devices and protocols are the most common in the world, manufactured and supported a large number of manufacturers of electronics and software.YOU can order the product or service, simply use the ORDER FORM, fill in the appropriate application.